Name: Oxygen Sensor for Multi Gas Safety System
SKU: 508535

The Oxygen Sensor for Multi Gas Safety System is designed to ensure gas safety and monitor oxygen levels down to -50°C across a variety of industry applications. This sensor integrates with our

It uses advanced zirconia sensing to monitor and detect leaks of high concentrations, protecting staff when working near nitrogen, argon, helium and other gases.

Features

Monitor oxygen levels down to -50°C with real-time oxygen level readout
Monitor CO2 and O2 on the same system (eliminate multiple controls on a single system)
Audible and visual alarms to protect staff near potential hazards
3 user-configurable alarms (default is set at )
The remote display can be mounted up to 300 feet away
Easy to install, uses standard RJ45 and CAT-5e/CAT6 cables
International Power Supply (included)
10 years of sensor life

Per both the Occupational Safety and Health Administration (OSHA) and National Institute of Health (NIH) hazardous conditions may include areas where the oxygen concentrations fall below 19.5% or above 23.5% and require oxygen deficiency monitors.

Components

The Multi Gas Safety System allows you to pick and choose only the components you need to create a fully integrated system. See them below, or for more information on your application.

Oxygen Sensor for Multi Gas Safety System shown here (CM-7103)

Specifications

Oxygen Measurement: Zirconium Oxide (ZR)
Measurement Range: 0-23%
Measurement Interval: 2 Seconds
Maintenance Interval: Annual Ambient Calibration
Connections: Input / Output / Strobe - CAT5 8 pin connector
Response Time: 90% at 10 minutes
Sensor Reading Frequency: 0.5 Hz
Alarm Levels (O2 Deficiency): AL1 19.5%, AL2 16.5%, and AL3 12%.
Alarm Response Time: < 60 seconds
Operating Temperature: -58°F to 122°F (-50°C to 50°C)
Sensor Life Expectancy: >10 years

Electrical

Power Supply: POE via CM-7000 Series System
Power Input: POE via CM-7000 Series System
4-20mA outputs: 0-23% O2 Scaled
Mounting Height: Variable by application 12-72 in. from the ground
*Please note: the use of surge protector is required for optimum accuracy and longevity of your device*

Warranty

1 year on the device - .

Documents

(pdf)

Accessories

The Multi Gas Safety System starts with the CM-7005 tablet. Click on any of the add-on items it can control for more information.

- Provides a single central display unit for monitoring both carbon dioxide levels or oxygen levels across multiple locations.
) - Provides real-time CO2 readings for multiple sensors that are controlled by the CM-7005 CO2 multi sensor safety system tablet.
) - Triggers third-party devices like an exhaust fan, building management system, fire panel or remotely notify security of a high CO2 alarm. Includes CBL-7002 below.
) - Audible and visual strobe alarm used for interior placements.
)- Audible and visual strobe alarm for exterior placements.
) - Remote display that monitors all or a group of CO2 sensors.
- Provides a flashing indicator and audible alarm. Changes colors as the alarm level changes.
- Enables easy connectivity between the Remote Relay CM-7002, Strobe Tower CM-1026-5 or any external device that can be triggered by a relay.
- 3/8 inch connector on electronic solenoid enables remote shut off during gas leak. Plugs into Remote Relay CM-7002 or Main Tablet relay.
- 1/2 inch connector on electronic solenoid enables remote shut off during gas leak. Plugs into Remote Relay CM-7002 or Main Tablet relay.

Calibration Gas - Because of MDOT regulations, calibration gases must be shipped from a certified gas supplier. You can order calibration gas from your local supplier or you can order the following products from CalGasDirect.com.